Plumbing needs to be done right! If it is not done properly, it can create more expense and trouble! Not everyone is a plumber. Hire it out if you are not up to the job! That is great if you can do-it-yourself! You will need the right tools and know how. Read this article for some handy tricks and tips!
Find A Plumber You Believe In
Do not purchase a plumbing product with which you do not have faith. This includes paying attention to the plumbing company itself and their policies and values. Your intuition will pick up on it if you have any qualms about the company. You want to be a full supporter of the plumber and plumbing products you use.
Soldering Is Difficult
You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe shiny and clean. Polish these surfaces with a fine grit sandpaper until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action. Find out more Morningside Plumbing.
Prevent Frozen Pipes
On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. You can catch the water and use it for another household needs to prevent wasting it.
Thaw Out Freezing Pipes
Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it. Be always safe. Learn more Morningside Plumbing.
Avoid Chemical Drain Cleaners
The next time you have a clogged drain, avoid the simple solution of dumping drain-clearing chemicals into the pipes. While this method involves the least amount of effort, the chemicals in these liquid cleaners are destructive to your plumbing. Instead, consider using a little bit of elbow grease with a plunger, snake, or other device designed to clear your clog without chemicals. Or better yrt, call a local plumber.
Keep Overflow Holes Clear
Make sure you clean out overflow holes in your kitchen and bathroom sinks on a regular basis. These holes are intended to act as an emergency fail-safe to prevent spillage from a full sink, but if they are clogged, they cannot do their job. You can clean out an overflow hole using the same techniques you would for a clogged drain.
Plumbing Done Right
Hopefully, you have found the tips and tricks above to be quite handy! Whether you hire a plumber for the job or do-it-yourself, take the necessary time to do it right. It can create more expense and trouble in the future if it is not done properly! Read more Morningside Plumbing.
